MODCELL® LE80M Economic Type HPMC for Tile Adhesive

Product Description

Hydroxypropyl methyl cellulose HPMC LE80M is multifunctional additive for ready-mixes and dry-mix products. It is a high efficient water retention agent, thickener, stabilizer, adhesive, film-forming agent in building materials.

Technical Specification

Name	Hydroxypropyl Methyl Cellulose LE80M
CAS NO.	9004-65-3
HS CODE	3912390000
Appearance	White powder
Bulk density(g/cm3）	19.0--38(0.5-0.7) (lb/ft 3) (g/cm 3 )
Methyl content	28.0--30.0(%)
Hydroxypropyl content	7.5--12.0(%)
Gelling temperature	58--64(℃）
Moisture content	≤5.0(%)
PH value	5.0--9.0
Residue (Ash)	≤5.0(%)
Viscosity ( 2% Solution)	80,000(mPa.s, Brookfield 20rpm 20℃, -10%,+20%)
Package	25(kg/bag)

Applications

➢ Mortar for insulation mortar ➢ Interior/exterior wall putty ➢ Gypsum Plaster ➢ Ceramic tile adhesive ➢ Common mortar

Main Performances

➢ Standard open time ➢ Standard slip resistance ➢ Standard water retention ➢ Sufficient tensile adhesion strength ➢ Standard workability ☑ Storage and delivery It should be stored and delivered under dry and clean conditions in its original package form and away from heat. After the package is opened for production, tight re-sealing must be taken to avoid ingress of moisture. Package: 25kg/bag, multi-layer paper plastic composite bag with square bottom valve opening, with inner layer polyethylene film bag. ☑ Shelf life The warranty period is two years. Use it as early as possible under high temperature and humidity, so as not to increase the probability of caking. ☑ Product safety Hydroxypropyl methyl cellulose HPMC LK10M does not belong to hazardous material. Further information on safety aspects is given in Material Safety Data Sheet.